Futuretech DJ-SCAN 250 Manual de usuario Pagina 5
- Pagina / 15
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
51839250X62NXS_V_1_1_E.DOC
5/15
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it
on immediately. The arising condensation water might damage your device. Leave the device switched off
until it has reached room temperature.
This device falls under protection-class I. The power plug must only be plugged into a protection class I
outlet.
Never let the power-cord come into contact with other cables! Handle the power-cord and all connections
with the mains with particular caution!
Make sure that the available voltage is not higher than stated on the rear panel.
Make sure that the power-cord is never crimped or damaged by sharp edges. Check the device and the
power-cord from time to time.
Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the
power-cord by the plug. Never pull out the plug by tugging the power-cord.
During the initial start-up some smoke or smell may arise. This is a normal process and does not necessarily
mean that the device is defective.
Caution: During the operation, the housing becomes very hot.
Do not switch the device on and off in short intervals as this would reduce the lamp’s life.
HEALTH HAZARD!
Never look directly into the light source, as sensitive persons may suffer an
epileptic shock (especially meant for epileptics)!
Keep away children and amateurs!
OPERATING DETERMINATIONS
This device is a lighting effect for creating decorative effects. This product is only allowed to be operated with
an alternating voltage of 230 V, 50 Hz and was designed for indoor use only.
This device is designed for professional use, e.g. on stages, in discotheques, theatres etc.
Lighting effects are not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
Do not shake the device. Avoid brute force when installing or operating the device.
When choosing the installation-spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around. You endanger your own and the safety of
others!
The symbol
---m
determines the minimum distance from lighted objects. The minimum distance
between light-output and the illuminated surface must be more than 0.5 meters.
This device is only allowed for suspended installation via the mounting bracket. In order to safeguard
sufficient ventilation, leave 50 cm of free space around the device.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the
fixture.
Always fix the fixture with an appropriate safety-rope.
- DJ-SCAN 250 1
- MULTI-LANGUAGE-INSTRUCTIONS 2
- DMX-Scanner 4
- OPERATING DETERMINATIONS 5
- DESCRIPTION OF THE DEVICE 6
- Overview 7
- INSTALLATION 8
- Lamp adjustment 9
- Overhead rigging 9
- Master/Slave-operation 10
- Blackout-socket 10
- Connection with the mains 11
- OPERATION 12
- DMX-protocol 13
- CLEANING AND MAINTENANCE 14
- TECHNICAL SPECIFICATIONS 15
Panasonic EBGD50 manuály
Uživatelské manuály a uživatelské příručky pro Mobilní telefony Panasonic EBGD50.
Poskytujeme 2 manuály pdf Panasonic EBGD50 ke stažení zdarma podle typů dokumentů: Uživatelský manuál, Provozní pokyny
Comentarios a estos manuales